|
360 Modification Disc v1.53, flasheo más fácil para lectores Samsung, BenQ y Lite-On |
|
Escrito por Redacción
|
|
miércoles, 15 de abril de 2009 |
HTML clipboard Ya tenemos una nueva versión de 360 Modification Disc, la v1.53.
Su creador, FrostyTheSnowman ha hecho público este
disco en el que se incluye el software necesario para facilitar el
flasheo de los lectores Samsung, BenQ y Lite-On de XBOX 360. En esta
nueva versión v1.53 se ha remplazado el MTKFlash por el DOSFlash y también se ha
mejorado la detección del lector Samsung.
HTML clipboard
Mejoras añadidas para esta versión 360 Modification Disc v1.53 (nota)
- Complete Modding Solution for Samsung/BenQ/Lite-On
- iXtreme v1.51 (12x) Firmware
- Supports Samsung TS-H943
- Supports BenQ VAD6038
- Supports Lite-On DG-16D2S
- Supports Previously Modded Drives
- Supports Previously Spoofed Drives
- 100% DOS Based Dumping & Flashing
- Supports FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit)
- Fully Automatic Dumping & Flashing
- Step-by-Step Instructions
- Backup of all drive-related files to HDD
Changes in v1.53:
- Replaced MTKFlash for DOSFlash
- Improved Samsung Detection
Changes in v1.52:
- Fixed lockup/freezing issues with NTFS drives
- Improved BenQ/Samsung dumping/flashing stability
- Replaced MS-DOS with FreeDOS (more stable)
Changes in v1.51:
- Updated all firmware to iXtreme v1.51
- 100% Support for all PC SATA & IDE DVD-ROM drives
Changes in v1.5 Revision 2:
- Improved dumping/flashing speeds for BenQ/Samsung drives
- Added 'user firmware dump verification' prompt to prevent possible BenQ
bricking
- Revised menus and more detailed drive flashing/dumping instructions
Changes in v1.5 (Public Release):
- Initial release
NOTE: This disc requires a VIA VT6421 PCI SATA (or compatible) card
installed, and an NTFS or FAT32 formatted HDD/partition as the
'C:' drive for this disc to work properly.
NOTE 2: This disc *might* work with other types of SATA chipsets/cards,
but it is recommended that you use a VIA VT6421 SATA card.
NOTE 3: USB serial adapters are NOT compatible with this disc!
Usage:
- Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC
- Burn this ISO, and boot this disc in your PC
- Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive
- All firmware dumps, modified firmware, and other files related to the drive
being
modified will be placed in the following directories on your 'C' drive:
Samsung TS-H943 - C:\SAMFILES
BenQ VAD6038 - C:\BENFILES
Lite-On DG-16D2S - C:\LONFILES
Disclaimer:
I take absolutely no responsibilty for the use of this disc by anyone. Use at
your own risk!
Special Thanks & Credits:
Team Jungle - For the awesome iXtreme v1.51 firmware used by this disc
FreeDOS Project - For the FreeDOS Operating System used by this disc
Winternals - For the NTFSDOS driver used by this disc (NTFS Support)
Dennis Bareis - GETRESP (used to input variables into MS-DOS batch files)
Franck Uberto - XMSDSK (used to create a RAMDISK under MS-DOS)
Geremia, Modfreakz, Podger, Redline99 and Tiros - DOSFLASH (BenQ/Lite-On)
Joseph Lin - MTKFLASH (Samsung)
Caster420 - Firmtool (Samsung/BenQ/Lite-On iXtreme firmware generating)
TJ - DVDKey & DummyGen (used to dump firmware for the Lite-On drive)
DuggyUK - For information on El Torito HDD Emulation used by this disc
Más info aquí.
esta recopilacion de flasheo funciona con las consolas que tienen fecha de fabricacion 2009-10-10 en adelante o a todas las lectoras y por que no hay un metodo en video bien detallado y por lo menos en traducido al español y lo pregunto por que cuando miro otros tutoriales solo hablan del MS28 pero no dicen si funciona para todas las lectoras solo mencionan unas toshiba y samsung... por lo menos mencionaste mas lectoras pero no esta especificado como haserlo o usarlo. me gustaria que aclararas mis dudas porfavor escribe-me gracias |